Contents
SESSION 1. COMPOSITES
Paper 1 Composite Applications and Challenges for Lightweight Design of Aircraft Structure
Dave Wood, BAE SYSTEMS – Military Air Solutions, UK
Paper 2 Quickstep curing technology: an out of – autoclave technology for prepegs and dry fibre reinforced laminates
Dr. J. Schlimbach, A. Ogale, D. Brosius & N. Noble, Quickstep GmbH, Germany
SESSION 2. NANOCOMPOSITES
Paper 3 Polymer nanocomposites with carbon nanotubes in aerospace and defence
Dr. James Njuguna, Cranefield University, UK
Paper 4 Nylon-12 nanocomposite thin films as protective barriers
Dr. Celia Stevens, M. Gnatowski & S. Duncan, Polymer Engineering Company Ltd, Canada
Paper 5 Thermal conductivity of ethylene vinyl acetate copolymer/carbon nanofiller blends
Dr. Sayata Ghose, K.A. Watson, D.C. Working, J.W. Connell, J.G. Smith Jr, Y. Lin & Y.P. Sun, National Institute of Aerospace, USA
Paper 6 Nanoscopically controlled polymer containing gadolinium atoms for shielding against radiation
Joseph D Lichtenhan, J.P. Spratt, S. Aghara, P.A. Wheeler & R. Leadon, Hybrid Plastics, USA
Paper 7 Conducting polymer nanofibres obtained by electrospinning
Dr. Lucie Robitaille & A. Laforgue, National Research Council Canada, Canada
Paper 8 Influence of space radiation on nano adhesive bonding of high performance polymer
Dr. Shantanu Bhowmik, Delft University of Technology, The Netherlands
SESSION 3. NOVEL POLYMER SYSTEMS
Paper 9 Electrically conductive shape memory polymer with anisotropic electro-thermo-mechanical properties
W.M. Huang, N. Liu, S.Y. Phoo & C.S. Chan, Nanyang Technological University, Singapore
Paper 10 Development of new, conductive and microwave-lossy materials involving conducting polymer coatings
Dr. Jamshid Avloni, Eeonyx Corp, USA & Dr. A. Henn, Marktek Inc, USA
Paper 11 Incorporating functional fillers into silicone elastomer systems
Brian Burkitt, B. Riegler & S. Bruner, NuSil Technology Europe, UK
SESSION 4. ELASTOMERS AND RUBBERS
Paper 12 Elastomeric solutions to seal jet oils at high temperature with fluoroelastomers and perfluoroelastomers
Jean-Luc Matoux, EW Thomas & R.W. Schnell, DuPont Performance Elastomers SA, Switzerland
Paper 13 Novel nylon/halogenated butyl rubber blends in protection against warfare agents
Dr. Marek Gnatowski, J.D. Van Dyke & A. Burczyk, Polymer Engineering Company Ltd, Canada
Paper 14 Development of wider performance range rubber seal materials and the utility of FEA modeling Dr. Robert Keller, Freudenberg-NOK General Partnership, USA
SESSION 5 OTHER MATERIALS AND ASSESSMENT
Paper 15 New PEEK™ products and process technology developments for lightweight aerospace components
Didier Padey, John Walling & Alan Wood, Victrex plc, France
Paper 16 Polymerisation, compound and elastomeric modified ETFE in aerospace and defence applications
Phil Spencer, AGC Chemicals Europe Ltd, UK
Paper 17 Life-time prediction and assessment of metal-polymer laminates
Julie Etheridge, AWE plc, UK
SESSION 6 POLYMER PROCESSES AND APPLICATIONS
Paper 18 Sonochemical surface modification for advanced electronic materials
Dr. Andy Cobley & Prof T. Mason, The Sonochemistry Centre at Coventry University, UK
Paper 19 Polymers for exo-atmospheric supersonic vehicles: a tough life
Dr. Duncan Broughton, AWEplc, UK
Paper 20 The role of polymeric materials for effective structural damping
John R. House MIOA, QinetiQ, UK
Paper 21 Liquid Crystal Polymer (LCP): the ultimate solution for low-cost RF flexible electronics and antennae
Rushi Vyas, A. Ride, S. Bhattacharya & M.M. Tentzeris, Georgia Institute of Technology, USA
This item is sent from one of our shipping locations in England, UK. Expected delivery time is 14-21 days.
