|
Product
|
Description
|
| ASTM F2018 |
This ASTM F2018 plastic standard test method includes information for time-to-failure of plastics using plane strain tensile specimens. |
| ASTM F2019 |
This ASTM F2019 plastic standard test method includes information for rehabilitation of existing pipelines and conduits by the pulled in place installation of glass reinforced plastic (grp) cured-in-place thermosetting resin pipe (cipp). |
| ASTM F2021 |
This ASTM F2021 plastic standard test method includes information for design and installation of plastic siphonic roof drainage systems. |
| ASTM F2023 |
This ASTM F2023 plastic standard test method includes information for evaluating the oxidative resistance of crosslinked polyethylene (pex) tubing and systems to hot chlorinated water. |
| ASTM F2080 |
This ASTM F2080 plastic standard test method includes information for cold-expansion fittings with metal compression-sleeves for cross-linked polyethylene (pex) pipe. |
| ASTM F2098 |
This ASTM F2098 plastic standard test method includes information for stainless steel clamps for securing sdr9 cross-linked polyethylene (pex) tubing to metal insert fittings. |
| ASTM F2135 |
This ASTM F2135 plastic standard test method includes information for molded drain, waste, and vent (dwv) short-pattern plastic fittings. |
| ASTM F2136 |
This ASTM F2136 plastic standard test method includes information for notched, constant ligament-stress (ncls) test to determine slow-crack-growth resistance of hdpe resins or hdpe corrugated pipe. |
| ASTM F2138 |
This ASTM F2138 plastic standard test method includes information for excess flow valves for natural gas service. |
| ASTM F2145 |
This ASTM F2145 plastic standard test method includes information for polyamide 11 (pa 11) mechanical fittings for use on outside diameter controlled polyamide 11 pipe and tubing. |
| ASTM F2158 |
This ASTM F2158 plastic standard test method includes information for residential central-vacuum tube and fittings. |
| ASTM F2159 |
This ASTM F2159 plastic standard test method includes information for plastic insert fittings utilizing a copper crimp ring for sdr9 cross-linked polyethylene (pex) tubing. |
| ASTM F2160 |
This ASTM F2160 plastic standard test method includes information for solid wall high density polyethylene (hdpe) conduit based on controlled outside diameter (od). |
| ASTM F2164 |
This ASTM F2164 plastic standard test method includes information for field leak testing of polyethylene (pe) pressure piping systems using hydrostatic pressure. |
| ASTM F2165 |
This ASTM F2165 plastic standard test method includes information for flexible pre-insulated piping. |
| ASTM F2176 |
This ASTM F2176 plastic standard test method includes information for mechanical couplings used on polyethylene conduit, duct and innerduct. |
| ASTM F2206 |
This ASTM F2206 plastic standard test method includes information for fabricated fittings of butt-fused polyethylene (pe) plastic pipe, fittings, sheet stock, plate stock, or block stock. |
| ASTM F2207 |
This ASTM F2207 plastic standard test method includes information for cured-in-place pipe lining system for rehabilitation of metallic gas pipe. |
| ASTM F2231 |
This ASTM F2231 plastic standard test method includes information for charpy impact test on thin specimens of polyethylene used in pressurized pipes. |
| ASTM F2261 |
This ASTM F2261 plastic standard test method includes information for pressure rating polyvinyl chloride (pvc) plastic pipe fittings, schedule 40 and 80 socket-type. |
