|
Product
|
Description
|
| ISO 14852 |
This ISO 14852 plastics test standard includes information about the determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- method by analysis of evolved carbon dioxide. |
| ISO 14853/Cor1:2009 |
This ISO 14853/Cor1:2009 plastics test standard includes information about the determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - method by measurement of biogas production - technical corrigendum 1. |
| ISO 14853 |
This ISO 14853 plastics test standard includes information about the determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - method by measurement of biogas production. |
| ISO 14855-1/Cor1:2009 |
This ISO 14855-1/Cor1:2009 plastics test standard includes information about the determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - method by analysis of evolved carbon dioxide - part 1: general method - technical corrigendum 1. |
| ISO 14855-1 |
This ISO 14855-1 plastics test standard includes information about the determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - method by analysis of evolved carbon dioxide - part 1: general method. |
| ISO 14855-2/Cor1:2009 |
ISO 14855-2/Cor1:2009 Test Standard - Technical Corrigendum |
| ISO 14855-2 |
ISO 14855-2:2007 specifies a method for determining the ultimate aerobic biodegradability of plastic materials under controlled composting conditions by gravimetric measurement of the amount of carbon dioxide evolved. The method is designed to yield an optimum rate of biodegradation by adjusting the humidity, aeration and temperature of the composting vessel. |
| ISO 14896/Amd1 |
This ISO 14896/Amd1 Plastics - Polyurethane raw materials - Determination of isocyanate content - Amendment 1: Acceptable variations in the procedure for method B |
| ISO 14896 |
This ISO 14896 plastics test standard includes information about polyurethane raw materials - determination of isocyanate content. |
| ISO 14897 |
This ISO 14897 plastics test standard includes information about polyols for use in the production of polyurethane - determination of water content. |
| ISO 14898 |
This ISO 14898 plastics test standard includes information about aromatic isocyanates for use in the production of polyurethane -- determination of acidity. |
| ISO 14899 |
This ISO 14899 plastics test standard includes information about polyols for use in the production of polyurethane -- determination of basicity. |
| ISO 14900/Cor1 |
This ISO 14900/Cor1 plastics test standard includes information about polyols for use in the production of polyurethane - determination of hydroxyl number - corrigendum. |
| ISO 14900 |
This ISO 14900 plastics test standard includes information about polyols for use in the production of polyurethane -- determination of hydroxyl number. |
| ISO 14910-1 |
This ISO 14910-1 plastics test standard includes information about thermoplastic polyester/ester and polyether/ester elastomers for molding and extrusion - part 1: designation system and basis for specifications. |
| ISO 14910-2 |
This ISO 14910-2 plastics test standard includes information about thermoplastic polyester/ester and polyether/ester elastomers for molding and extrusion - part 2: preparation of test specimens and determination of properties. |
| ISO 15013 |
This ISO 15013 plastics test standard includes information about extruded sheets of polypropylene (pp) - requirements and test methods. |
| ISO 15014:2007 |
This International Standard specifies the requirements and test methods for solid flat extruded sheets of poly(vinylidene fluoride) homopolymers and poly(vinylidene fluoride) copolymers without fillers or reinforcing materials. This International Standard also applies to PVDF sheet in rolled form. It applies only to thicknesses from 1 mm to 15 mm. |
| ISO 15015:2007 |
This International Standard specifies the requirements and test methods for solid flat extruded sheets of impact-modified acrylonitrile-styrene copolymer materials: acrylonitrile-butadiene-styrene (ABS), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) (commonly known as AES) and acrylonitrile-styrene-acrylate (ASA), without fillers or reinforcing materials. This International Standard also applies to ABS, AEPDS and ASA sheet in rolled form. It applies only to thicknesses from 0,25 mm to 20,0 mm. |
| ISO 15023-1 |
This ISO 15023-1 plastics test standard includes information about poly(vinyl alcohol) (pval) materials - part 1: designation system and basis for specifications. |
| ISO 15023-2 |
This ISO 15023-2 plastics test standard includes information about poly(vinyl alcohol) (pval) materials - part 2: determination of properties. |
| ISO 15024 |
This ISO 15024 plastics test standard includes information about fibre-reinforced plastic composites - determination of mode i interlaminar fracture toughness, gic, for unidirectionally reinforced materials. |
| ISO 15028 |
This ISO 15028 plastics test standard includes information about aromatic isocyanates for use in the production of polyurethanes - determination of hydrolysable chlorine. |
| ISO 15033 |
This ISO 15033 plastics test standard includes information about the determination of caprolactam and its cyclic and linear oligomers by hplc. |
