|
Product
|
Description
|
| ISO 6383-2 |
This ISO 6383-2 plastics test standard includes information about film and sheeting - determination of tear resistance - part 2 : elmendorf method. |
| ISO 6401 |
This International Standard specifies a method for the determination of vinyl chloride monomer in homopolymer and copolymer resins of vinyl chloride and compounded materials. The method is based on sample dissolution and headspace gas chromatography. Concentrations of vinyl chloride in the range 0,1 mg/kg to 3,0 mg/kg can be determined. |
| ISO 6402-1 |
This ISO 6402-1 plastics test standard includes information about acrylonitrile-styrene-acrylate (asa), acrylonitrile-(ethylene-propylene-diene)-styrene (aepds) and acrylonitrile-(chlorinated polyethylene)-styrene (acs) molding and extrusion materials -- part 1: designation system and basis for specifications (available in english only). |
| ISO 6402-2 |
This ISO 6402-2 plastics test standard includes information about acrylonitrile-styrene-acrylate (asa), acrylonitrile-(ethylene-propylene-diene)-styrene (aepds) and acrylonitrile-(chlorinated polyethylene)-styrene (acs) molding and extrusion materials - part 2: preparation of test specimens and determination of properties. |
| ISO 6601 |
This ISO 6601 plastics test standard includes information about friction and wear by sliding - identification of test parameters. |
| ISO 6603-1 |
This ISO 6603-1 plastics test standard includes information about the determination of puncture impact behaviour of rigid part 1: non-instrumented impact testing. |
| ISO 6603-2 |
This ISO 6603-2 plastics test standard includes information about the determination of puncture impact behaviour of rigid part 2: instrumented impact testing. |
| ISO 6721-1 |
This ISO 6721-1 plastics test standard includes information about the determination of dynamic mechanical properties -- part 1: general principles. |
| ISO 6721-10 |
This ISO 6721-10 plastics test standard includes information about the determination of dynamic mechanical properties -- part 10: complex shear viscosity using a parallel-plate oscillatory rheometer. |
| ISO 6721-2 |
This ISO 6721-2 plastics test standard includes information about the determination of dynamic mechanical properties - part 2: torsion-pendulum method. |
| ISO 6721-3/Cor1 |
ISO 6721-3/Cor1 plastics test standard corrigendum. |
| ISO 6721-3 |
This ISO 6721-3 plastics test standard includes information about the determination of dynamic mechanical properties - part 3: flexural vibration - resonance-curve method. |
| ISO 6721-4 |
This ISO 6721-4 plastics test standard includes information about the determination of dynamic mechanical properties - part 4: tensile vibration - non-resonance method. |
| ISO 6721-5/Amd1 |
This ISO 6721-5/Amd1 plastics test standard includes information about the determination of dynamic mechanical properties - part 5: flexural vibration - non-resonance method - amendment 1. |
| ISO 6721-5 |
This ISO 6721-5 plastics test standard includes information about the determination of dynamic mechanical properties - part 5: flexural vibration - non-resonance method. |
| ISO 6721-6/Amd1 |
This ISO 6721-6/Amd1 plastics test standard includes information about the determination of dynamic mechanical properties - part 6: shear vibration - non-resonance method - amendment 1. |
| ISO 6721-6 |
This ISO 6721-6 plastics test standard includes information about the determination of dynamic mechanical properties - part 6: shear vibration - non-resonance method. |
| ISO 6721-7/Amd1 |
This ISO 6721-7/Amd1 plastics test standard includes information about the determination of dynamic mechanical properties - part 7: torsional vibration - non-resonance method - amendment 1. |
| ISO 6721-7 |
This ISO 6721-7 plastics test standard includes information about the determination of dynamic mechanical properties - part 7: torsional vibration - non-resonance method. |
| ISO 6721-8 |
This ISO 6721-8 plastics test standard includes information about the determination of dynamic mechanical properties - part 8: longitudinal and shear vibration - wave-propagation method. |
| ISO 6721-9/Amd1:2007 |
This ISO 6721-9/Amd1:2007 plastics test standard includes information about the determination of dynamic mechanical properties - part 9: tensile vibration - sonic-pulse propagation method. Amendment on precision. |
| ISO 6721-9 |
This ISO 6721-9 plastics test standard includes information about the determination of dynamic mechanical properties - part 9: tensile vibration - sonic-pulse propagation method. |
| ISO 6804 |
This ISO 6804 document specifies the requirements for three types of rubber or plastics inlet hoses and hose assemblies for washing-machines and dishwashers connected to the domestic water supply at a pressure not exceeding 1 MPa (10 bar). It is applicable to the following types of hose: * Type 1: rubber hoses for unheated water supply (maximum temperature 70 °C). * Type 2: rubber hoses for heated water supply (maximum temperature 90 °C). * Type 3: plastics hoses for unheated water supply (maximum temperature 60 °C). |
| ISO 7059 |
This ISO 7059 plastics test standard includes information about caprolactam for industrial use -- determination of absorbance at a wavelength of 290 nm. |
