|
Product
|
Description
|
| ISO 2561 |
This ISO 2561 plastics test standard includes information about the determination of residual styrene monomer in polystyrene (ps) and impact-resistant polystyrene (ps-i) by gas chromatography. |
| ISO 25761:2008 |
The method specified in this International Standard measures the basic constituents in polyols that are soluble in glacial acetic acid and reactive with perchloric acid. |
| ISO 25762 |
This ISO 25762 International Standard gives guidelines for the assessment of the fire characteristics and fire performance of fibre-reinforced polymer (FRP) composites, particularly in structural applications in buildings and transport. |
| ISO 2577 |
This ISO 8307 rubber test standard includes information about thermosetting molding materials and determination of shrinkage. Ready for download in PDF format immediately after purchase! |
| ISO 2578 |
This ISO 2578 plastics test standard includes information about the determination of time-temperature limits after prolonged exposure to heat. |
| ISO 2580-1 |
This ISO 2580-1 plastics test standard includes information about acrylonitrile-butadiene-styrene (abs) molding and extrusion materials -- part 1: designation system and basis for specifications (available in english only). |
| ISO 2580-2 |
This ISO 2580-2 plastics test standard includes information about acrylonitrile-butadiene-styrene (abs) molding and extrusion materials - part 2: preparation of test specimens and determination of properties. |
| ISO 26603 |
ISO 26603:2008 is used to determine the total chlorine content of aromatic isocyanates used in the preparation of polyurethanes. |
| ISO 26842-1 |
This ISO 26842-1 plastics test standard includes information about test methods for the evaluation and selection of adhesives for indoor wood product. Resistance to delamination in non-severe environments. |
| ISO 26842-2 |
This ISO 26842-2 plastics test standard includes information about adhesives including test methods for the evaluation and selection of adhesives for indoor wood products with focus on resistance to delamination in severe environments |
| ISO 2796 |
This ISO 2796 plastics test standard includes information about cellular plastics, rigid - test for dimensional stability. |
| ISO 2797 |
This ISO 2797 plastics test standard includes information about textile glass -- rovings -- basis for a specification. |
| ISO 28078-1:2009 |
ISO 28078-1:2009 establishes a system of designation for PPS thermoplastic materials, which may be used as the basis for specifications. |
| ISO 28078-2:2009 |
ISO 28078-2:2009 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of poly(phenylene sulfide) moulding and extrusion materials. |
| ISO 2818/Cor1:2007 |
This ISO 2818/Cor1:2007 Corrigendum of plastics test standard includes information about preparation of test specimens by machining. |
| ISO 2818 |
This ISO 2818 plastics test standard includes information about preparation of test specimens by machining. |
| ISO 28941-1 |
ISO 28941-1 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
| ISO 2896 |
This ISO 2896 plastics test standard includes information about rigid cellular determination of water absorption. |
| ISO 2897-1 |
This ISO 2897-1 plastics test standard includes information about impact-resistant polystyrene (ps-i) molding and extrusion materials - part 1: designation system and basis for specifications. |
| ISO 2897-2 |
This ISO 2897-2 plastics test standard includes information about impact-resistant polystyrene (ps-i) molding and extrusion materials - part 2: preparation of test specimens and determination of properties. |
| ISO 2898-1 |
This ISO 2898-1 plastics test standard includes information about plasticized poly(vinyl chloride) (pvc-p) molding and extrusion materials - part 1: designation system and basis for specifications. |
| ISO 2898-2 |
This ISO 2898-2:2008 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PVC-P moulding and extrusion materials. |
| ISO 291 |
ISO 291:2008 sets out specifications relating to the conditioning and testing of all plastics and all types of test specimen at constant atmospheric conditions. |
| ISO 293 |
This ISO 293 plastics test standard includes information about compression molding of test specimens of thermoplastic materials. |
