|
Product
|
Description
|
| ISO 20392 |
ISO 20392:2007 specifies equipment and procedures for determining the compressive creep of test specimens under various conditions of stress. It is applicable to thermal-insulation products. |
| ISO 20393 |
This ISO 20393 Thermal-insulating materials — Determination of long-term water absorption by diffusion |
| ISO ISO 20394 |
ISO 20394:2007 specifies the equipment and procedures for determining the effect, on the mechanical properties and moisture content of a product, of the successive cycling of the product from dry conditions at -20 °C to wet conditions (water) at +20 °C. It is applicable to thermal-insulation products. |
| ISO 20753 |
ISO 20753:2008 specifies dimensional requirements relating to test specimens prepared from plastics materials intended for processing by moulding as well as to test specimens prepared by machining from sheets or shaped articles. |
| ISO 2078 |
This ISO 2078 plastics test standard includes information about textile glass -- yarns -- designation. |
| ISO 20965 |
This ISO 20965 plastics test standard includes information about the determination of the transient extensional viscosity of polymer melts. |
| ISO 21048 |
This ISO 21048 plastics test standard includes information about epoxy resins - determination of 1,2-glycol content. |
| ISO 2113/Cor1 |
This ISO 2113/Cor1 plastics test standard includes information about textile glass - woven fabrics - basis for specification - corrigendum. |
| ISO 2113 |
This ISO 2113 plastics test standard includes information about reinforcement fibres -- woven fabrics -- basis for a specification. |
| ISO 2114 |
This ISO 2114 plastics test standard includes information about plastics (polyester resins) and paints and varnishes (binders) -- determination of partial acid value and total acid value. |
| ISO 2115 |
This ISO 2115 plastics test standard includes information about polymer dispersions - determination of white point temperature and minimum film-forming temperature. |
| ISO 21318 |
This ISO 21318 plastics test standard includes information about epoxy resins - determination of electrical conductivity of aqueous resin extracts. |
| ISO 21367:2007 |
This International Standard specifies a test method for plastics for the determination of the heat release rate, ignitability, surface spread of a flame, falling droplets/particles and smoke production using a “medium” scale specimen that simulates the early development stage of the fire. This test method can be used as a screening test for intermediate scale and large scale tests in addition to its use in factory production control, research and product development. |
| ISO 21368 |
This ISO 21368 plastics test standard includes information about adhesives - guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures. |
| ISO 21509 |
This ISO 21509 plastics test standard includes information about plastics and ebonite - verification of shore durometers. |
| ISO 21627-1 |
This ISO 21627-1 plastics test standard includes information about epoxy resins - determination of chlorine content - part 1: inorganic chlorine. |
| ISO 21627-1 |
This ISO 21627-1 plastics test standard includes information about ISO 21627-1:2009 which specifies a direct potentiometric method for the determination of inorganic chlorine in epoxy resins, also called ionic chlorine. The inorganic chlorine content is expressed in milligrams per kilogram of epoxy resin. |
| ISO 21627-2 |
This ISO 21627-2 plastics test standard includes information about epoxy resins - determination of chlorine content - part 2: easily saponifiable chlorine. |
| ISO 21627-2 |
This ISO 21627-2 document specifies a method for the determination of easily saponifiable chlorine in epoxy resins. The easily saponifiable chlorine content is the quantity of easily saponifiable chlorine in a given quantity of epoxy resin. The values obtained are indicative of the concentration of easily saponifiable chlorine in chlorohydrin groups in the resin. |
| ISO 21627-3 |
This ISO 21627-3 plastics test standard includes information about epoxy resins - determination of chlorine content - part 3: total chlorine. |
| ISO 21627-3 |
This ISO 21627-3 document specifies a method for the determination of the total amount of chlorine in epoxy resins. The chlorine measured by this method, referred to as total chlorine, includes saponifiable organic chlorine and inorganic chlorine. |
| ISO 22007-1:2009 |
This part of ISO 22007 describes the background to methods for the determination of the thermal conductivity and thermal diffusivity of polymeric materials. |
| ISO 22007-2:2008 |
This part of ISO 22007 specifies a method for the determination of the thermal conductivity and thermal diffusivity, and hence the specific heat capacity per unit volume, of plastics. The experimental arrangement can be designed to match different specimen sizes. Measurements can be made in gaseous and vacuum environments at a range of temperatures and pressures. |
| ISO 22007-3:2008 |
This part of ISO 22007 specifies a temperature wave analysis method for the determination of the thermal diffusivity of thin films and plates of plastics in the through-thickness direction. The method can be used on plastics in either the solid or molten state, and having either an isotropic or an orthotropic structure. |
